Category Archives: progress update

Scale progress

Got this much of the scale done at the event while i wasnt playing.

Posted in progress update | Leave a comment

project management

so Ive moved. at least Ive mostly moved at the time of this writing. my workshop was disassembled and relocated to a makerspace, and my computer chair was designed to be more user friendly. since I am the primary user … Continue reading

Posted in Bigfoot, Lifehacking, Printing, progress update | Tagged , , | Leave a comment

Scalemaille

I make chainmaille. Usually when I say that people get mad and say they hate spam mail. Then I have to say no I mean chainmaille as in armor. I weave chain into garments. I’ve made vests, sleeves, inlays, a … Continue reading

Posted in progress update | Leave a comment

You may not know that I have a motorcycle it looks like this I’ve been working on for some time now but it wasn’t exactly the bike I wanted to be and in order to get it to that place … Continue reading

Posted on by turomar | Leave a comment

Busy Busy Busy

Whirling mad with design and printing various projects for FI.  Bigfoot, the drone, and Nicci have all sat idle while I try and make my power armor not stupid-heavy for the next event. Converting Janus to a hand-held pair of … Continue reading

Posted in FI, progress update | Leave a comment

RC plane Electric Motor Mount

Having decided to convert my gas-engine RC plane into an electric for a variety of reasons as part of the repair process, I designed this: To mount the outrunner motor onto the fuselage.  I have a substantial stock of lipo … Continue reading

Posted in Plane, progress update, RC | Tagged , , | Leave a comment

Bigfoot

For some time now, work has been proceeding to bring to fruition the crudely concieved idea of a 3d printer that would not only supply inverse reactive current for use in unilateral phase detractors, but would also be capable of … Continue reading

Posted in Bigfoot, progress update | Tagged , , | Leave a comment

AR15 Two Part Lower Assembly

This is a brief overview of how my two-part printed Lower Receiver is assembled into a fully functional Lower Receiver.   I’m going to assemble an AR-15 Lower Receiver from parts. The lower Receiver is the part of the AR(Armalite … Continue reading

Posted in Guns, progress update | Tagged , , , , | 12 Comments

Power armor redux

I’ve made some substantial improvements to the power armor costume for FI.  Instead of pull-type gas springs(for closing storm doors) I have now installed push-type gas springs(for opening cabinet or vehicle doors vertically).  You can see both up and down … Continue reading

Posted in FI, progress update | Tagged , , | Leave a comment

AR-15 printing

My AR-15 lower broke last weekend while shooting out at the range.  I’m printing a new version with a few fixes and improvements i thought of while using the last one. Here is a video of it printing.  

Posted in Guns, progress update | Tagged , | Leave a comment